|
|
|
|
|
Weaving of up and down intersection way, differ from the plain weave, two each by turns in a vertical-crossway
angle. It is possible to used the wires thicker than in plain weave but is has a long point of eliminating as the crossway linear angle become small.
This is suitable for high delt P. |
|
Mesh |
Dia(mm) |
S.W.G |
Opening(mm) |
Opening(%) |
40 |
0.28 |
31 1/2 |
0.35 |
31 |
|
0.25 |
33 |
0.38 |
36 |
|
0.24 |
33 1/2 |
0.39 |
38 |
|
0.18 |
36 |
0.45 |
51 |
200 |
0.058 |
46 1/2 |
0.069 |
30 |
200 |
0.04 |
48 |
0.87 |
47 |
250 |
0.04 |
48 |
0.061 |
36 |
|
0.03 |
49 |
0.071 |
49 |
300 |
0.04 |
48 |
0.044 |
27 |
325 |
0.35 |
48 1/2 |
0.043 |
30 |
350 |
0.03 |
49 |
0.042 |
34 |
400 |
0.03 |
49 |
0.033 |
27 |
|
MESH
The no. of mesh within a lineal distance of 25.4mm(1") in a unit indicates the dimension of Mesh(Some times using magnifying glass.)
|
|
WIRE DIA
Indicates the thick of wire itself by the No. in the wire gauge list Normally applies B.W.G when the wire is thick, S.W.G when the wire is thin.
|
|
OPENING
Distance between lines and lines which forms the net
Distance(mm) = 25.4(mm) / Mesh - Gauage(mm)
|
|
OPEN RATIO
Give the percentage of open area in a standard wire mesh.
Open Ratio(%) = ( |
Opening(mm) |
)2 X 100 |
Opening(mm) + Wire dia(mm) |
|
|